DURAN® Torque wrench socket

SKU: N/A Categories: , ,
for screw caps GL 25, GL 32 or GL 45
  • Enables accurate closure of DURAN® GL 25, 32 and 45 caps to the recommended torques
  • Cap thread size and type is permanently engraved into the top surface
  • Suitable for cleanroom use
  • Engraved lot-specific code for certification
  • Socket hole fits “industry standard” 1/4 inch wrench drive size
  • Machined from a high strength Aluminium alloy EN AW-7075
  • Component « Made in Germany »

Product Overview

Torque is the rotational force applied during application or removal of a closure from a bottle. The correct application torque for a bottle cap is very important as it affects the sealing integrity. Over-tightening may cause some parts of the cap to be under more pressure than others, which could result in an improper seal. Alternatively, the container may leak or the closure could easily unscrew if too little torque is used. When the correct torque is applied, it will provide sealing integrity under the specified temperature, humidity, and loading conditions. A validation report for the application torque values is available on request. Reference: BFSV Verpackungsinstitut Packaging Test Report No. 4085A-19


292332844 Torque wrench socket for DURAN® GL 45 PBT cap, Aluminium

Length l (mm) = 23
Color = Silver
Colour = Silver
h1 (mm) = 8
d2 (OD) (mm) = 50.8
Diameter d (mm) = 6.35
h (mm) = 15
d1 (OD) (mm) = 60
Diameter (mm) = 6.35
ID (in) = 1/4
Material = Aluminium
Height (mm) = 23
Overall Height (mm) = 23
Fits Thread Size (mm) = GL 25 GL 25
Quantity = 1
Weight (kg) = 051