Senz TDS (0~1999ppm)
The Senz TDS tester is designed for ruggedness and accuracy. TDS is measured in water processing and industrial water treatment and control. The conversion factor from conductivity is to the factor of 2 which is an industrial standard. It is the best gauge to perform QC and on-site checks in boilers, cooling towers and chemical dilution for waste disposal.
Precise display of 1 ppm over the scale of 0 to 1990 ppm.
On activation, the tester calibrates the end-point automatically at prescribed standard solutions.
The tester automatically senses a stable end-point reading and freezes it for recording.
Beeps at every press of the button and long beep on every completed function or end-point reading.
|Range:||1 to 1,990 ppm|
|Accuracy:||± 2% full scale|
|Battery Type:||4 x 1.5V button cell (Alkaline A76 or equivalent)|
|Battery Life:||Approx. 100 hours|
|Automatic Shut-off:||Approx. 15 minutes|
|Automatic Temperature Compensation:||0 to 50°C or 32 to 122°F|
|Operating Temperature:||0 to 50°C or 32 to 122°F|
|Packaging Dimension Size (LxWxH):||185mm x 65mm x 25mm|
|Packaging Weight:||Approx. 135gm|
|Product Dimension Size (LxWxH):||170mm x 32mm x 15mm|
|Product Weight:||Approx. 70gm|
|Click to download Instructions Manual|