DURAN Standard Socket, finished

Complies with DIN 12249 Form E
Manufactured from borosilicate glass 3.3
Ground (finer grinding quality, less roughness depth)
The finer surface reduces the risk of jamming the cuts
Minimized grease requirement
Very low leakage rate
Tight closure due to standard ground joint
Glass articles for further processing

Product Overview

The conical ground joint is the most common joint in glass apparatus engineering. The DURAN? standard sockets, ground, comply with DIN 12249 Form E in their design and meet higher requirements for the surface roughness. This reduces the need for grinding grease and the risk of jamming. Ground joints should always be used with grease or PTFE sleeves. KECK? Conical ground joint clamps are the perfect supplement for securing the conical ground joint.

Products

Catalog No	Socket Size	Diameter d (mm)	Wall Thickness s (mm)	Length l (mm)	Remarks	Quantity
286514608	5/13	8	1.5	115	–	10
286515604	7/16	10	1.5	115	–	10
286517005	10/19	13	1.5	115	–	50
286520007	12/21	15	1.8	115	–	50
286525408	14/23	17	1.8	115	–	50
286536602	19/26	22	1.8	125	–	50
286543803	24/29	28	2	140	–	1
286550001	29/32	33	2	135	–	50
286559207	34/35	40	2.3	145	–	10
286561204	45/40	50	2.5	140	–	10
286561401	100/60	110	5	180	Non-DIN size	1
286561607	40/38	46	2.3	150	Non-DIN size	10
286563402	50/42	54	2.5	140	Non-DIN size	10
286564407	55/44	58	2.5	160	–	10
286565206	60/46	65	3.2	160	Non-DIN size	10
286565806	71/51	75	3.2	160	Non-DIN size	5
286566202	85/55	90	3.5	175	Non-DIN size	1