DURAN® Standard Cone with Tip

finished

Complies with DIN 12249 Form G
Manufactured from borosilicate glass 3.3
Ground (finer grinding quality, less roughness depth)
The additional drain on the grinding enables a clean drain/leakage of liquids without wetting the grinding.
Tight closure due to standard ground joint
Glass articles for further processing

Product Overview

The DURAN® Standard Cones with tip comply with DIN 12249 Form G. The process has the function of a drip ring. It prevents the liquid from running down the inner wall of the vessel. For this purpose, the outlet is usually cut at an angle and fused. At the same time, mediums do not come into contact with the greased ground surface. The additional outlet can also be used as an attachment point for extensions for various purposes, e.g. as an inlet pipe.

Catalog No	Cone (NS)	Wall Thickness s (mm)	Diameter d (mm)	Length l (mm)	Remarks
286168605	34/35	2	30	145	–
286163007	7/16	1.5	6	120	Non-DIN size
286169404	45/40	2.3	40	143	–
286171204	60/46	2.5	56	160	Non-DIN size
286163401	10/19	1.5	8	120	Non-DIN size
286169601	100/60	3.5	90	210	Non-DIN size
286164003	12/21	1.5	11	123	–
286170208	40/38	2	36	150	Non-DIN size
286164406	14/23	1.5	13	130	–
286170808	50/42	2.3	46	150	Non-DIN size
286165205	19/26	1.8	17	140	–
286171007	55/44	2.5	50	160	Non-DIN size
286166004	24/29	1.8	22	147	–
286171607	71/51	3.2	65	170	Non-DIN size
286166801	29/32	2	26	145	–
286172209	85/55	3.5	80	170	Non-DIN size