- Empty cart.
- Continue Shopping
Velp HU 6 Hydrolysis Unit
Velp HU 6 Hydrolysis Unit
HU 6 Hydrolysis Unit
Convenient, reliable and safe hydrolysis unit, for the sample preparation prior to extraction for total fat determination.
Preliminary Hydrolysis for total fat determination
The VELP Scientifica Hydrolysis Unit HU 6 is the ideal solution for the sample preparation prior to solvent extraction for the determination of the total fat content, in order to free the fat molecules ready for extraction.
This procedure is required in a number of AOAC Official Methods to determine the fat content of food samples such as meat, cheese, seafood, chocolate, cereal flours, etc.
The HU 6 performs hydrolysis in complete safety and handles six samples at the same time in order to maximize productivity.
Fast and safe hydrolysis
The samples are heated in test-tubes in an aluminum heating block offering excellent thermal homogeneity. Hydrolysis is performed in an acidic environment (4N hydrochloric acid) and in some cases also in a basic environment (20% w/v ammonia) for about 60 minutes at a temperature of 170°C. The hydrolyzed sample is then filtered in a glass crucible and washed with warm deionized water to eliminate traces of hydrochloric acid.
The HU 6 is supplied with a vacuum pump that ensure safety thanks to the reduction of acid fumes.
The glass crucible containing the hydrolyzed and washed sample is oven dried before being placed in a desiccator. The crucible is then transferred directly to the SER 158 and SER 148 Solvent Extraction Unit avoiding any possible sample loss and ensuring improved accuracy of results.
The HU 6 is supplied with a vacuum pump that ensure safety thanks to the reduction of acid fumes.
The glass crucible containing the hydrolyzed and washed sample is oven dried before being placed in a desiccator. The crucible is then transferred directly to the SER 158 and SER 148 Solvent Extraction Unit avoiding any possible sample loss and ensuring improved accuracy of results.
Continuous filtration and rinsing of six samples in parallel
In some samples, direct solvent extraction is not efficient because the lipids are chemically bound to other components. The determination of the total fat content of these samples requires preliminary hydrolysis, followed by filtration and washing, in order to completely release the fat molecules.
The hydrolyzed sample is finally ready for extraction and can be easily transferred to the SER 148 or SER 158 Solvent Extraction Unit avoiding any possible sample loss and ensuring better accuracy of the results.
The HU 6 provides effective filtration and rinsing of 3 or 6 samples in parallel. The valves allow to selectively interrupt the vacuum in each position speeding up the filtration process.
TEMS™ Technology
HU 6 Hydrolysis Unit works with the innovative TEMS™ benefits, for huge savings.
Time Saving: rapid heating reduces wasted time
Energy Saving: limited energy consumption thus cutting CO2 emissions
Money Saving: cost reduction for each analysis
Space Saving: the narrow footprint saves valuable laboratory bench space
Time Saving: rapid heating reduces wasted time
Energy Saving: limited energy consumption thus cutting CO2 emissions
Money Saving: cost reduction for each analysis
Space Saving: the narrow footprint saves valuable laboratory bench space
Required Accessories
Optional Accessories
TECHNICAL DATA
| CONSTRUCTION MATERIAL: | epoxy painted stainless steel structure |
| NUMBER OF POSITIONS: | 6 samples |
| SET TEMPERATURE: | display visualization |
| COUNTDOWN: | display visualization |
| DISPLAY: | LCD |
| NUMBER OF PROGRAMS: | 20 |
| SELECTABLE LANGUAGE: | IT, EN |
| TEMPERATURE RANGE: | from room temp. to 200 °C |
| TEMPERATURE CALIBRATION: | automatic |
| STABILITY OF THE HEATING BLOCK TEMPERATURE: | ± 0,5°C |
| PRECISION OF THE HEATING BLOCK TEMPERATURE: | ± 0,5°C |
| REACHING OF SET TEMPERATURE: | acoustic and visual signal |
| POWER: | 1150 W |
| DIMENSIONS (WXHXD): | 420x230x130 mm (16.5×9.0x5.1 in) |
| WEIGHT: | 14 Kg / 30.8 lb |
Specification
HU 6 Hydrolysis Unit
Convenient, reliable and safe hydrolysis unit, for the sample preparation prior to extraction for total fat determination.
Preliminary Hydrolysis for total fat determination
The VELP Scientifica Hydrolysis Unit HU 6 is the ideal solution for the sample preparation prior to solvent extraction for the determination of the total fat content, in order to free the fat molecules ready for extraction.
This procedure is required in a number of AOAC Official Methods to determine the fat content of food samples such as meat, cheese, seafood, chocolate, cereal flours, etc.
The HU 6 performs hydrolysis in complete safety and handles six samples at the same time in order to maximize productivity.
Fast and safe hydrolysis
The samples are heated in test-tubes in an aluminum heating block offering excellent thermal homogeneity. Hydrolysis is performed in an acidic environment (4N hydrochloric acid) and in some cases also in a basic environment (20% w/v ammonia) for about 60 minutes at a temperature of 170°C. The hydrolyzed sample is then filtered in a glass crucible and washed with warm deionized water to eliminate traces of hydrochloric acid.
The HU 6 is supplied with a vacuum pump that ensure safety thanks to the reduction of acid fumes.
The glass crucible containing the hydrolyzed and washed sample is oven dried before being placed in a desiccator. The crucible is then transferred directly to the SER 158 and SER 148 Solvent Extraction Unit avoiding any possible sample loss and ensuring improved accuracy of results.
The HU 6 is supplied with a vacuum pump that ensure safety thanks to the reduction of acid fumes.
The glass crucible containing the hydrolyzed and washed sample is oven dried before being placed in a desiccator. The crucible is then transferred directly to the SER 158 and SER 148 Solvent Extraction Unit avoiding any possible sample loss and ensuring improved accuracy of results.
Continuous filtration and rinsing of six samples in parallel
In some samples, direct solvent extraction is not efficient because the lipids are chemically bound to other components. The determination of the total fat content of these samples requires preliminary hydrolysis, followed by filtration and washing, in order to completely release the fat molecules.
The hydrolyzed sample is finally ready for extraction and can be easily transferred to the SER 148 or SER 158 Solvent Extraction Unit avoiding any possible sample loss and ensuring better accuracy of the results.
The HU 6 provides effective filtration and rinsing of 3 or 6 samples in parallel. The valves allow to selectively interrupt the vacuum in each position speeding up the filtration process.
TEMS™ Technology
HU 6 Hydrolysis Unit works with the innovative TEMS™ benefits, for huge savings.
Time Saving: rapid heating reduces wasted time
Energy Saving: limited energy consumption thus cutting CO2 emissions
Money Saving: cost reduction for each analysis
Space Saving: the narrow footprint saves valuable laboratory bench space
Time Saving: rapid heating reduces wasted time
Energy Saving: limited energy consumption thus cutting CO2 emissions
Money Saving: cost reduction for each analysis
Space Saving: the narrow footprint saves valuable laboratory bench space
Required Accessories
Optional Accessories
TECHNICAL DATA
| CONSTRUCTION MATERIAL: | epoxy painted stainless steel structure |
| NUMBER OF POSITIONS: | 6 samples |
| SET TEMPERATURE: | display visualization |
| COUNTDOWN: | display visualization |
| DISPLAY: | LCD |
| NUMBER OF PROGRAMS: | 20 |
| SELECTABLE LANGUAGE: | IT, EN |
| TEMPERATURE RANGE: | from room temp. to 200 °C |
| TEMPERATURE CALIBRATION: | automatic |
| STABILITY OF THE HEATING BLOCK TEMPERATURE: | ± 0,5°C |
| PRECISION OF THE HEATING BLOCK TEMPERATURE: | ± 0,5°C |
| REACHING OF SET TEMPERATURE: | acoustic and visual signal |
| POWER: | 1150 W |
| DIMENSIONS (WXHXD): | 420x230x130 mm (16.5×9.0x5.1 in) |
| WEIGHT: | 14 Kg / 30.8 lb |
Accesories
HU 6 Hydrolysis Unit
Convenient, reliable and safe hydrolysis unit, for the sample preparation prior to extraction for total fat determination.
Preliminary Hydrolysis for total fat determination
The VELP Scientifica Hydrolysis Unit HU 6 is the ideal solution for the sample preparation prior to solvent extraction for the determination of the total fat content, in order to free the fat molecules ready for extraction.
This procedure is required in a number of AOAC Official Methods to determine the fat content of food samples such as meat, cheese, seafood, chocolate, cereal flours, etc.
The HU 6 performs hydrolysis in complete safety and handles six samples at the same time in order to maximize productivity.
Fast and safe hydrolysis
The samples are heated in test-tubes in an aluminum heating block offering excellent thermal homogeneity. Hydrolysis is performed in an acidic environment (4N hydrochloric acid) and in some cases also in a basic environment (20% w/v ammonia) for about 60 minutes at a temperature of 170°C. The hydrolyzed sample is then filtered in a glass crucible and washed with warm deionized water to eliminate traces of hydrochloric acid.
The HU 6 is supplied with a vacuum pump that ensure safety thanks to the reduction of acid fumes.
The glass crucible containing the hydrolyzed and washed sample is oven dried before being placed in a desiccator. The crucible is then transferred directly to the SER 158 and SER 148 Solvent Extraction Unit avoiding any possible sample loss and ensuring improved accuracy of results.
The HU 6 is supplied with a vacuum pump that ensure safety thanks to the reduction of acid fumes.
The glass crucible containing the hydrolyzed and washed sample is oven dried before being placed in a desiccator. The crucible is then transferred directly to the SER 158 and SER 148 Solvent Extraction Unit avoiding any possible sample loss and ensuring improved accuracy of results.
Continuous filtration and rinsing of six samples in parallel
In some samples, direct solvent extraction is not efficient because the lipids are chemically bound to other components. The determination of the total fat content of these samples requires preliminary hydrolysis, followed by filtration and washing, in order to completely release the fat molecules.
The hydrolyzed sample is finally ready for extraction and can be easily transferred to the SER 148 or SER 158 Solvent Extraction Unit avoiding any possible sample loss and ensuring better accuracy of the results.
The HU 6 provides effective filtration and rinsing of 3 or 6 samples in parallel. The valves allow to selectively interrupt the vacuum in each position speeding up the filtration process.
TEMS™ Technology
HU 6 Hydrolysis Unit works with the innovative TEMS™ benefits, for huge savings.
Time Saving: rapid heating reduces wasted time
Energy Saving: limited energy consumption thus cutting CO2 emissions
Money Saving: cost reduction for each analysis
Space Saving: the narrow footprint saves valuable laboratory bench space
Time Saving: rapid heating reduces wasted time
Energy Saving: limited energy consumption thus cutting CO2 emissions
Money Saving: cost reduction for each analysis
Space Saving: the narrow footprint saves valuable laboratory bench space
Required Accessories
Optional Accessories
TECHNICAL DATA
| CONSTRUCTION MATERIAL: | epoxy painted stainless steel structure |
| NUMBER OF POSITIONS: | 6 samples |
| SET TEMPERATURE: | display visualization |
| COUNTDOWN: | display visualization |
| DISPLAY: | LCD |
| NUMBER OF PROGRAMS: | 20 |
| SELECTABLE LANGUAGE: | IT, EN |
| TEMPERATURE RANGE: | from room temp. to 200 °C |
| TEMPERATURE CALIBRATION: | automatic |
| STABILITY OF THE HEATING BLOCK TEMPERATURE: | ± 0,5°C |
| PRECISION OF THE HEATING BLOCK TEMPERATURE: | ± 0,5°C |
| REACHING OF SET TEMPERATURE: | acoustic and visual signal |
| POWER: | 1150 W |
| DIMENSIONS (WXHXD): | 420x230x130 mm (16.5×9.0x5.1 in) |
| WEIGHT: | 14 Kg / 30.8 lb |
Download
HU 6 Hydrolysis Unit
Convenient, reliable and safe hydrolysis unit, for the sample preparation prior to extraction for total fat determination.
Preliminary Hydrolysis for total fat determination
The VELP Scientifica Hydrolysis Unit HU 6 is the ideal solution for the sample preparation prior to solvent extraction for the determination of the total fat content, in order to free the fat molecules ready for extraction.
This procedure is required in a number of AOAC Official Methods to determine the fat content of food samples such as meat, cheese, seafood, chocolate, cereal flours, etc.
The HU 6 performs hydrolysis in complete safety and handles six samples at the same time in order to maximize productivity.
Fast and safe hydrolysis
The samples are heated in test-tubes in an aluminum heating block offering excellent thermal homogeneity. Hydrolysis is performed in an acidic environment (4N hydrochloric acid) and in some cases also in a basic environment (20% w/v ammonia) for about 60 minutes at a temperature of 170°C. The hydrolyzed sample is then filtered in a glass crucible and washed with warm deionized water to eliminate traces of hydrochloric acid.
The HU 6 is supplied with a vacuum pump that ensure safety thanks to the reduction of acid fumes.
The glass crucible containing the hydrolyzed and washed sample is oven dried before being placed in a desiccator. The crucible is then transferred directly to the SER 158 and SER 148 Solvent Extraction Unit avoiding any possible sample loss and ensuring improved accuracy of results.
The HU 6 is supplied with a vacuum pump that ensure safety thanks to the reduction of acid fumes.
The glass crucible containing the hydrolyzed and washed sample is oven dried before being placed in a desiccator. The crucible is then transferred directly to the SER 158 and SER 148 Solvent Extraction Unit avoiding any possible sample loss and ensuring improved accuracy of results.
Continuous filtration and rinsing of six samples in parallel
In some samples, direct solvent extraction is not efficient because the lipids are chemically bound to other components. The determination of the total fat content of these samples requires preliminary hydrolysis, followed by filtration and washing, in order to completely release the fat molecules.
The hydrolyzed sample is finally ready for extraction and can be easily transferred to the SER 148 or SER 158 Solvent Extraction Unit avoiding any possible sample loss and ensuring better accuracy of the results.
The HU 6 provides effective filtration and rinsing of 3 or 6 samples in parallel. The valves allow to selectively interrupt the vacuum in each position speeding up the filtration process.
TEMS™ Technology
HU 6 Hydrolysis Unit works with the innovative TEMS™ benefits, for huge savings.
Time Saving: rapid heating reduces wasted time
Energy Saving: limited energy consumption thus cutting CO2 emissions
Money Saving: cost reduction for each analysis
Space Saving: the narrow footprint saves valuable laboratory bench space
Time Saving: rapid heating reduces wasted time
Energy Saving: limited energy consumption thus cutting CO2 emissions
Money Saving: cost reduction for each analysis
Space Saving: the narrow footprint saves valuable laboratory bench space
Required Accessories
Optional Accessories
TECHNICAL DATA
| CONSTRUCTION MATERIAL: | epoxy painted stainless steel structure |
| NUMBER OF POSITIONS: | 6 samples |
| SET TEMPERATURE: | display visualization |
| COUNTDOWN: | display visualization |
| DISPLAY: | LCD |
| NUMBER OF PROGRAMS: | 20 |
| SELECTABLE LANGUAGE: | IT, EN |
| TEMPERATURE RANGE: | from room temp. to 200 °C |
| TEMPERATURE CALIBRATION: | automatic |
| STABILITY OF THE HEATING BLOCK TEMPERATURE: | ± 0,5°C |
| PRECISION OF THE HEATING BLOCK TEMPERATURE: | ± 0,5°C |
| REACHING OF SET TEMPERATURE: | acoustic and visual signal |
| POWER: | 1150 W |
| DIMENSIONS (WXHXD): | 420x230x130 mm (16.5×9.0x5.1 in) |
| WEIGHT: | 14 Kg / 30.8 lb |
Related products
AREX-6 Digital PRO Hot Plate Stirrer
RM5,000.00 – RM6,390.00
Laboratory Cooled Incubator, FOC 200IL Connect
RM26,543.00
RX3 Vortex Mixer
RM974.00
ES Overhead Stirrer
RM4,151.00
AREX-6 Hot Plate Stirrer
RM3,714.00 – RM5,650.00
MULTI-HS 6/15 Digital Multi-position Hot Plate Stirrer
RM9,412.00 – RM14,942.00
Laboratory Cooled Incubator, FTC 120
RM11,643.00
HSC 7 Ceramic Hot Plate Stirrer
RM2,971.00
Velp ARE-6 Hot Plate Stirrer
RM3,186.00
TX4 Digital Vortex Mixer with IR Sensor
RM1,730.00
Laboratory Jar Testing Flocculator, FP4
RM5,410.00
Velp PW Overhead Stirrer
RM8,103.00
MICROSTIRRER Magnetic Stirrer
RM841.00
ESP Ultraflat Magnetic Stirrer
RM1,165.00
Velp Controller Digital/Advance
RM10,804.00 – RM12,697.00
Laboratory Cooled Incubator, FOC 200E Connect
RM11,648.00
ZX4 Advanced IR Vortex Mixer
RM1,218.00 – RM2,086.00
ZX3 Advanced Vortex Mixer
RM912.00 – RM1,900.00
