DURAN® KPG® Stirrer Bearing, type HP/HQ, interchangeable

with standard ground cone
  • Manufactured from borosilicate glass 3.3
  • High accuracy and uniformity within defined tolerances for nominal diameter and fit
  • Tight closure due to standard ground joint
  • Ground and polished bearing surface
  • Interchangeable

 

Product Overview

KPG agitators consist of a KPG agitator shaft and a KPG bearing sleeve. KPG bearing parts are manufactured with high accuracy and uniformity. The specified tolerances for nominal diameter and fit are maintained by careful checks. This guarantees the interchangeability of the KPG bearing sleeves and KPG stirrer shafts. Due to the low bearing clearance between the running surfaces, almost absolute sealing and completely quiet running can be achieved with suitable lubrication. KPG agitators are an alternative to magnetic stirrers and are used for reaction vessels that are not accessible from below when very viscous reaction mixtures are to be stirred or a high stirring speed is required.

 

Products

Catalog No Designation Diameter d (mm) Height h (mm) Height h1 (mm) Cone (NS) Quantity
245235504 HP 10 10 167 75 24/29 1
245285603 HQ 10 10 180 75 29/32 1