Dispensing Peristaltic Pump BT100-1F with DG Pump Head

– Applicable pump heads: YZ1515X, YZII15, YZ2515X, YZII25, DG-1/DG-2
– Micro flow rates transferring: The smallest flow rate can reach 0.2 μL/min
– Dispensing function: dispense the fluid at desired volume, dispensing time and batch cycles.
– Back suction function: 0s – 99.9min, resolution is 0.1s
– Operating mode: Membrane keypad and rotary encoded switch
– Speed control: The speed can be adjusted manually or automatically through external control interface

– Prime key: For fast filling and emptying at full speed

– Power-off memory: Return to previous state when power on

– Calibration function: The flow rates and the dispensing volume can be calibrated to increase the accuracy
– Communication function: the pump could be controlled by computer through RS485 communication interface.

– Speed: 0.1-100 rpm, CW/CCW

– Speed resolution: 0.1 rpm

– Control mode: Control panel, external signal control and communication control are available

– Display: LCD for running state

– Dispensing volume: 0.01 mL to 9.99 L

– Copy number: 0 to 9999, 0 means unlimited cycle.

– Pause time: 0.1s-99.9 min, resolution is 0.1s

– Exteranl control: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz corresponding to 0.1-100 rpm)

– Speed output: 10Hz – 10kHz corresponding to 0.1 – 100 rpm

– Start/stop output: OC gate signal

– Direction output: OC gate signal

– Communication interface: RS485

– Power: AC90V –  AC260V

– Power consumption: < 40W
– Operating condition: Temperature 0 to 40°C, Relative humidity < 80%
– Dimensions (L × W × H): 285 × 207 × 180 (mm)
– Drive Weight: 3.8 kg
– IP rating: IP 31